TIMBER DEALERS.CO.NZList 0

NEW ZEALAND · PROJECT COST GUIDE

Paving Costs NZ: Pavers, Base, Bedding and Edge Restraints

Compare the full paving system, including the specified pavers, base, bedding, restraints and surface levels. A supplied paver price does not establish the installed cost of a path, patio or driveway.

Updated 2026-11-17 · Product, tax and installation scope shown separately

Price your own measurementsPaver Quantity Calculator →

Prices by type and purchase unit

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Concrete paverspiece / m² of surfaceNZ$14.40 / eachOne 400 × 400 × 40 mm paver. Includes GST.WestStone Natural Vienna paver 400 × 400 × 40 mm ↗2026-11-10From NZ$315 / m²Auckland · Excludes GST
Outdoor porcelain paverspiece / m² of surfaceAsk for a supplier quoteAsk for a local quote
Natural stone pavingm² or palletAsk for a supplier quoteAsk for a local quote

Regional NZ price list

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
AucklandFrom NZ$315 / m²Excludes GSTConcrete paversWest Auckland installed base rate for 400 × 400 mm pavers, base, bedding and edge restraint. Major excavation is separate.Pristine Exteriors ↗Checked 2026-11-17
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Concrete pavers example
Illustrative image

Concrete pavers

A modular patio or path where a standard face size gives a consistent grid.

Specify surface and traffic rating, joint width, edge restraint and finish level. Price site works independently of the pieces.

Outdoor porcelain pavers example
Supplier example ↗

Outdoor porcelain pavers

A finished outdoor area with a selected installation and drainage system.

Check the manufacturer’s laying method, cutting costs, steps and breakage. Confirm the product rating for the planned use.

Natural stone paving example
Supplier example ↗

Natural stone paving

A path or courtyard where natural variation and irregular edges are part of the design.

Compare usable pallet yield, selected thickness, joints and edge cuts. Request a base allowance that reflects the chosen laying system.

Choose the paver size, thickness and intended use

Paths, patios and vehicle-use paving

Select the paving system for its intended traffic and the project specification before choosing a price. Paver size, thickness, finish and the required prepared layers can vary by application. The existing 400 mm surface-paver reference identifies one product; its each price is not proof that it suits every driveway or paving system.

Base, bedding and restraints sit below and around the pavers

Measure the specified base and bedding depths independently from the surface unit count. Include the selected grading, any compaction/order allowance and edge restraint. Drainage and finished levels also belong in the project scope; a table of loose paver prices leaves these parts of the installation unresolved.

Patterns, borders and reinstatement change the work

A straight grid over prepared ground has a different cutting and installation scope from curved borders or replacing an existing surface. Count whole modules with the selected joint allowance, then check edge cuts and spare units. Ask an installer to itemise excavation, disposal, layers and laying rather than quoting only an unexplained surface rate.

Paving Costs — material price checks

Advertised examples checked on 10 November 2026. Each price belongs to the named product and purchase unit. These are source references, not Timber Dealers offers or a completed-job average.

Named materialAdvertised priceTax basisPurchased specification
WestStone Natural Vienna paver 400 × 400 × 40 mmNZ$14.40 / eachIncludes GSTOne 400 × 400 × 40 mm paver
Daltons washed sand half cubic metreNZ$132 / packIncludes GST0.5 m³ unit; special order

Calculate unit modules and cut allowances

  • Patterns, curves and edge cuts change the full-unit order.
  • Base and bedding use thickness and compaction rather than paver count.
  • Unit thickness, finish and intended traffic use affect the selected product.

How to build and compare your budget

Price a complete paving build-up from the subgrade up

Measure finished levels, edge length, steps and curves, then lay out regular units before ordering full packs. Narrow paths or borders can drive more cuts than broad patios. Confirm traffic use, including any occasional delivery vehicles or wheeled equipment.

Ask for excavation, spoil, prepared base, bedding, finished surface, edge restraints and drainage on separate lines. Agree where the paving stops and how it meets plants, existing surfaces and door thresholds. Ask how paving waste and future replacement stock will be handled.

Worked orders you can recalculate

Each example changes one measurement. Open it to see the exact starting inputs, adjust the layout and enter your own quote.

Paved area length: 3 m

82 pavers
  • Pavers: 82 pavers

NZ$1,180.80 incl. GST · Paving surface units

Open this example →

Paved area length: 6 m

163 pavers
  • Pavers: 163 pavers

NZ$2,347.20 incl. GST · Paving surface units

Open this example →

Paved area length: 9 m

244 pavers
  • Pavers: 244 pavers

NZ$3,513.60 incl. GST · Paving surface units

Open this example →

WestStone Vienna 400 × 400 × 40 mm. Base, bedding, edges, excavation and laying are additional. The displayed material prices are the dated examples above.

Base and bedding use compacted depth, not paver count

Ask for an itemised scope that identifies the product or system, quantities, tax basis, delivery and the work included.

  • Excavation, disposal, compaction and labour
  • Edge restraints, drainage and jointing material unless entered
  • Plant hire, access and delivery
  • Confirm suitability for the intended pedestrian or vehicle use.
  • Price the exact paver face, thickness and finish.
  • Check levels, subgrade and drainage before ordering surface material.

Questions about Paving Costs

Does a paver price per m² include the base?

Usually the unit needs clarification: a material-area conversion may cover only the visible pavers. Ask whether base, bedding, edging, excavation and installation are included.

How does the calculator account for joints?

It uses the selected paver dimensions plus the joint dimensions to estimate installed modules, then adds the entered cutting allowance. A detailed border layout can require further full units.

Can the same paver and base be used for paths and driveways?

Use the product suitability and project design for the intended traffic. Surface dimensions alone do not establish the required paver thickness or prepared layers.

Compare supply-only pavers with installed paving quotations

Sources and technical guidance