TIMBER DEALERS.CO.NZList 0

NEW ZEALAND · PROJECT COST GUIDE

Sealant Costs NZ: Joint Volume, Cartridge Capacity and Preparation

Calculate the filled joint volume, use the selected product capacity and round to whole cartridges. Keep mass-labelled cartridges, substrate preparation and backing materials explicit in the estimate.

Updated 2026-11-17 · Product, tax and installation scope shown separately

Price your own measurementsSealant Cartridge Calculator →

Prices by type and purchase unit

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Roof and gutter sealantcartridgeNZ$23.15 / eachOne 300 g white cartridge. Includes GST.Selleys 300g White Roof and Gutter Silicone Waterproof Sealant ↗2026-11-10Ask for a local quote
Sanitary siliconecartridgeAsk for a supplier quoteAsk for a local quote
Movement-joint sealantcartridge / linear metre installedAsk for a supplier quoteAsk for a local quote

Regional NZ price list

Use the named supply references above for a starting basket. Request local delivered or installed pricing for your measured job.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
AucklandQuote requiredAsk for availability and a measured rate delivered to your postcode.
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Roof and gutter sealant example
Supplier example ↗

Roof and gutter sealant

A weather-exposed joint where the identified sealant suits the substrate and movement.

Compare verified volume and joint geometry. Check preparation, primer, backing and exposure limits.

Sanitary silicone example
Supplier example ↗

Sanitary silicone

Compatible bathroom or kitchen seals detailed around fittings and junctions.

Specify compatible substrates, colour and old-sealant removal. Allow for correct tooling and clean surfaces.

Movement-joint sealant example
Supplier example ↗

Movement-joint sealant

A designed external or floor joint that depends on sealant movement capability and correct backing.

Use specified width, depth and movement rating. Include backer rod and primer in the material and labour schedule.

Measure the filled cross-section and total joint run

Measure the filled bead geometry

Start with total joint length and the filled width and depth. A rectangular joint and a triangular corner bead use different cross-sectional volumes. Keep the intended joint profile visible in the calculation, rather than assuming the nozzle opening alone determines how much material will be used.

Cartridge mass and volume are different purchase descriptions

Use the stated cartridge capacity in volume, or a verified density if a mass conversion is necessary. The current roof-and-gutter cartridge is labelled 300 g; that cannot silently become 300 mL. Round the calculated requirement to whole cartridges once the actual selected capacity is established.

Select the sealant and preparation for the application

Roof and gutter joints, wet-area beads and movement joints can need different products and preparation. Primer, backing material, cleaning and masking may sit outside the cartridge cost. Match the substrate and joint requirements before comparing cartridge prices, then list those supporting materials separately.

Sealant Costs — material price checks

Advertised examples checked on 10 November 2026. Each price belongs to the named product and purchase unit. These are source references, not Timber Dealers offers or a completed-job average.

Named materialAdvertised priceTax basisPurchased specification
Selleys 300g White Roof and Gutter Silicone Waterproof SealantNZ$23.15 / eachIncludes GSTOne 300 g white cartridge

Rectangular and triangular beads consume different volumes

  • Joint width and depth change volume multiplicatively.
  • Backer rod and bond-breaking details affect the filled profile.
  • A 300g cartridge is a mass description; it must not be silently treated as 300mL.

How to build and compare your budget

Price the joint and preparation with the material consumption

Walk each joint and group runs by cross-section, substrate, movement and access. Include complex ends and interrupted runs in the site scope. Use the measured filled profile to order cartridges rather than the apparent width of the skinned joint.

List old material removal, substrate repair, primer, backer rod, masking and clean-up. Confirm cure times and protection arrangements before handing the area to the following trade. For repair work, ask what failures are due to substrate or joint movement and how those are priced.

Worked orders you can recalculate

Each example changes one measurement. Open it to see the exact starting inputs, adjust the layout and enter your own quote.

Total joint length: 15 m

2 cartridges
  • Sealant cartridges: 2 cartridges
Open this example →

Total joint length: 30 m

3 cartridges
  • Sealant cartridges: 3 cartridges
Open this example →

Total joint length: 45 m

5 cartridges
  • Sealant cartridges: 5 cartridges
Open this example →

A gram-labelled cartridge needs a verified volume conversion

Ask for an itemised scope that identifies the product or system, quantities, tax basis, delivery and the work included.

  • Backer rod, primer, cleaning, masking and labour
  • Substrate repairs and joint movement design
  • Extra losses beyond the entered allowance
  • Use a verified volume in mL or product density to convert mass correctly.
  • Check movement capability and substrate compatibility.
  • Confirm whether the intended joint is rectangular, triangular or another specified profile.

Questions about Sealant Costs

How do I calculate how much sealant I need?

Calculate filled cross-sectional area times total joint length, using consistent units. For a rectangular bead, metres of run times width and depth in millimetres gives millilitres; a triangular bead uses half that section.

Does a 300 g cartridge contain 300 mL?

Not necessarily. Grams measure mass and millilitres measure volume. Use the manufacturer stated capacity or verified density before calculating the number of cartridges.

Can one roof-and-gutter sealant price every bathroom joint?

No. A price reference identifies a named product and application. Match product suitability, substrate preparation and the required joint system before using that rate.

Price whole cartridges for the selected sealant and application

Sources and technical guidance