NEW ZEALAND · PROJECT COST GUIDE
Roof Underlay and Flashing Costs NZ: Rolls, Laps and Formed Lengths
Underlay and flashings use different ordering units. Price rolls using effective coverage after the specified laps; price each flashing profile from its measured run, material, dimensions and purchase length.
Updated 2026-11-17 · Product, tax and installation scope shown separately
Prices by type and purchase unit
Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.
| Type | Quote unit | Named product price | Regional benchmark |
|---|---|---|---|
| Roof underlay | roll / net m² | NZ$166.66 / pack50 m² roll; 1.25 m × 40 m. Includes GST.Masons Roof Underlay VHP Strong 1.25 m × 40 m ↗2026-11-10 | Ask for a local quote |
| Folded metal flashings | linear metre / custom piece | Ask for a supplier quote | Ask for a local quote |
| Flashing tape | roll | Ask for a supplier quote | Ask for a local quote |
Regional NZ price list
Use the named supply references above for a starting basket. Request local delivered or installed pricing for your measured job.
| Region | Price in NZD | What the price covers | Source |
|---|---|---|---|
| Northland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Auckland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Waikato | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Bay of Plenty | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Wellington | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Canterbury | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Otago / Southland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Other NZ regions | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.
Types and photo examples

Roof underlay
A roof assembly that specifies underlay beneath its weather-shedding surface.
Compare coverage after laps, orientation, exposure limits and support requirements. Price tapes, fasteners and installation as separate lines.

Folded metal flashings
Edges, transitions, parapets and junctions where metal must be folded for actual site dimensions.
Ask for a measured flashing schedule with girth, folds, material, finish and joint allowances.

Flashing tape
Detailing at approved junctions within a compatible external assembly.
Verify substrates, primer, tape width and overlap. Price shaped corners and difficult penetrations from the detail schedule.
Use effective underlay coverage rather than gross roll area
Underlay roll coverage
Record the selected underlay and nominal roll dimensions, then use the installation-required overlaps to obtain usable coverage. Do not apply the full gross roll area as if every square metre were installed cover.
For comparing rolls and estimating whole-roll purchases.
Ridge and barge flashings
Measure runs independently and specify the formed profile, material and finish. Allow for selected laps and cuts rather than pricing all roof details from roof area alone.
For long edge and ridge details.
Valleys and penetrations
Valley, wall-junction, pipe and other penetration details can require different formed or proprietary components. Keep them separate from a basic ridge-length allowance.
For roofs with junctions and details beyond plain rectangular planes.
Tapes, fixings and installation
Confirm compatible tapes, fasteners, sealing and installation requirements for the selected system. A roof-sheet price is not a flashing price or proof of a complete weatherproof junction.
For checking the complete accessory and labour scope.
Roof Underlay and Flashing Costs — material price checks
Advertised examples checked on 10 November 2026. Each price belongs to the named product and purchase unit. These are source references, not Timber Dealers offers or a completed-job average.
| Named material | Advertised price | Tax basis | Purchased specification |
|---|---|---|---|
| Masons Roof Underlay VHP Strong 1.25 m × 40 m | NZ$166.66 / pack | Includes GST | 50 m² roll; 1.25 m × 40 m |
Prepare a flashing schedule by junction type
- Required overlaps reduce installed coverage per roll.
- Ridge, barge, apron, valley and penetration details need separate flashing schedules.
- Material thickness, profile, coating and compatibility can differ at each junction.
How to build and compare your budget
Measure roof junctions before comparing metre rates
Count hips, valleys, abutments, verges and penetrations on a roof plan. Ask for folded lengths, corners and joints separately. A wide or multi-fold flashing can use much more sheet material than a simple angle at the same linear metre rate.
For the membrane order, plan roll orientation and count overlaps and offcuts around detail work. Ask which trade supplies temporary protection and who checks the junction before the sheets cover it. Include delivery and time for bespoke folded items in the scope.
Worked orders you can recalculate
Each example changes one measurement. Open it to see the exact starting inputs, adjust the layout and enter your own quote.
Length along the eave: 6 m
2 rolls- Underlay rolls: 2 rolls
Length along the eave: 12 m
3 rolls- Underlay rolls: 3 rolls
Length along the eave: 18 m
4 rolls- Underlay rolls: 4 rolls
Fold dimensions, coating and stock lengths affect each flashing
Ask for an itemised scope that identifies the product or system, quantities, tax basis, delivery and the work included.
- Custom folded flashing quotes where no stock reference is available
- Tapes, sealants, penetrations and installation labour
- Access, scaffold and delivery
- Read the underlay exposure, fixing and coverage instructions.
- Ask for fold dimensions and finish when quoting flashings.
- Keep nominal roll area separate from effective covered roof area.
Questions about Roof Underlay and Flashing Costs
Why does a 50 m² roll not necessarily cover 50 m² of roof?
Side laps, end laps, cuts and detailing consume part of the gross material. Use the net coverage applicable to the selected installation.
Can the roof-sheet price be used as the flashing rate?
No. Flashings are specified formed products with their own material, dimensions, length and fabrication cost.
What dimensions should I send for a flashing quote?
Supply the required profile or drawing, material and finish, run lengths, stock or custom lengths, laps and relevant junction details.