TIMBER DEALERS.CO.NZList 0

Roofing & rainwater · New Zealand

Roof Underlay Calculator

Convert sloped area into rolls using effective installed coverage.

Enter your measurements

Measurements
Measure parallel to the gutter, including the end overhangs.
Measure across the roof in plan, including eaves. Do not enter the sloping length.
PlanEave length · 12 mSpan · 8 mCross sectionPitch · 20°
Measure the roof in plan, including eaves. Diagram not to scale.
Product and layout
Deduct product-required laps from nominal roll coverage.
Ordering allowance
Enter an allowance for your actual cuts, handling or placement.

Underlay rolls

3 rolls
Horizontal roof projection
96 m²
Sloped roof area
102.161 m²
Add prices to this calculation

Enter supplier rates in the units shown. Add labour and delivery only if you want them included.

Underlay rolls3 rolls
Not priced
Price sources for underlay rolls
Masons Roof Underlay VHP Strong 1.25 m × 40 m ↗

NZ$166.66 / pack · Includes GST · checked 2026-11-10

50 m² roll; 1.25 m × 40 m. Gross roll area; actual net coverage requires installation laps and detailing. Fixings and tapes extra.

Reference only. Confirm the same product, pack or scope with the supplier before using a rate.
Add delivery, labour or contingency

Material estimate

Enter a supplier rate to see an estimate. Empty rates stay unpriced.

Worked example

Length along the eave: 12 m · Full horizontal roof span: 8 m · Roof pitch: 20°

3 rolls

How it works and what to check

Sloped area × allowance ÷ effective roll coverage

  1. For equal-pitch roof planes, sloped area = measured horizontal roof projection ÷ cos(pitch). Include eaves in the entered dimensions. Hips, valleys, penetrations, laps and cut layouts need a separate schedule.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • Enter dimensions including eaves. Roof pitch, minimum slope, fasteners, laps and water management are product and project specific.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Roof underlayroll / net m²NZ$166.66 / pack50 m² roll; 1.25 m × 40 m. Includes GST.Masons Roof Underlay VHP Strong 1.25 m × 40 m ↗2026-11-10Ask for a local quote
Folded metal flashingslinear metre / custom pieceAsk for a supplier quoteAsk for a local quote
Flashing taperollAsk for a supplier quoteAsk for a local quote

Prices by NZ region

Use the named supply references above for a starting basket. Request local delivered or installed pricing for your measured job.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
AucklandQuote requiredAsk for availability and a measured rate delivered to your postcode.
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Roof underlay example
Supplier example ↗

Roof underlay

A roof assembly that specifies underlay beneath its weather-shedding surface.

Folded metal flashings example
Illustrative image

Folded metal flashings

Edges, transitions, parapets and junctions where metal must be folded for actual site dimensions.

Flashing tape example
Supplier example ↗

Flashing tape

Detailing at approved junctions within a compatible external assembly.

Roofing & rainwater: practical questions

What is included in the roof underlay calculator?

Convert sloped area into rolls using effective installed coverage. The input specification defines the quantity being measured; separate work needs its own schedule.

How do I check the roof underlay calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. Enter dimensions including eaves. Roof pitch, minimum slope, fasteners, laps and water management are product and project specific.

Materials for your schedule

Browse roofing and envelope →
Product and technical references