
Corrugated long-run steel
A pitched roof with a compatible metal profile, finish and slope.
Roofing & rainwater · New Zealand
Find the number, cut length and total lineal metres of metal roof sheets for a gable or single slope.
136.215 lineal m total · 16 per slope
Enter supplier rates in the units shown. Add labour and delivery only if you want them included.
NZ$22.15 / m · Includes GST · checked 2026-11-10
845 mm nominal width; 0.4 mm steel; special order. Per linear metre; effective cover width not verified, so no m² conversion; flashings, underlay, fixings extra.
Reference only. Confirm the same product, pack or scope with the supplier before using a rate.Enter a supplier rate to see an estimate. Empty rates stay unpriced.
Roof shape: Gable (two equal slopes) · Length along the eave: 12 m · Full horizontal roof span: 8 m · Roof pitch: 20° · Effective sheet cover width: 0.76 m
32 sheets × 4.257 m · 136.215 lineal m total · 16 per slope
Sheets per slope = eave length ÷ effective sheet cover, rounded up. Sheet length = horizontal run of one slope ÷ cos(pitch).
Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.
| Type | Quote unit | Named product price | Regional benchmark |
|---|---|---|---|
| Corrugated long-run steel | linear metre of sheet / m² installed roof | NZ$22.15 / m845 mm nominal width; 0.4 mm steel; special order. Includes GST.Armorsteel 845 × 0.4 mm zinc corrugate roofing steel ↗2026-11-10 | NZ$150–180 / m²Auckland · GST not confirmedNZ$18,000–26,000 / jobWaikato · GST not confirmedNZ$130–175 / m²Bay of Plenty · Includes GSTNZ$20,000–30,000 / jobCanterbury · GST not confirmed |
| Tray-profile metal roof | linear metre of sheet / m² installed roof | Ask for a supplier quote | NZ$140–200 / m²Bay of Plenty · Includes GST |
| Concrete roof tiles | tile / m² installed roof | Ask for a supplier quote | Ask for a local quote |
| Low-slope membrane roof | m² of roof plus perimeter details | Ask for a supplier quote | NZ$200–320 / m²Auckland · GST not confirmed |
| Polycarbonate roofing | sheet / m² of cover | NZ$68.16 / sheet2400 × 860 mm sheet. Includes GST.Tufclad Ultra clear polycarbonate 2400 × 860 mm ↗2026-11-10 | Ask for a local quote |
Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.
| Region | Price in NZD | What the price covers | Source |
|---|---|---|---|
| Northland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Auckland | NZ$150–180 / m²GST not confirmed | Corrugated long-run steelIllustrative simple single-storey gable reroof in Manurewa, 150 m² of roof. | South Auckland Roofing Company ↗Checked 2026-11-17 |
| Auckland | NZ$200–320 / m²GST not confirmed | Low-slope membrane roofPublished 140 m² Māngere Bridge replacement example including substrate and rainwater detail work. | South Auckland Roofing Company ↗Checked 2026-11-17 |
| Waikato | NZ$18,000–26,000 / jobGST not confirmed | Corrugated long-run steelHamilton/Waikato contractor guide for replacing old iron on a single-storey home with 140–170 m² of roof. Spouting is separate. | CTR Roofing ↗Checked 2026-11-17 |
| Bay of Plenty | NZ$130–175 / m²Includes GST | Corrugated long-run steelContractor rate for a long-run metal reroof based on quoted work, with strip-out and roof accessories in scope. | Bradley Roofing ↗Checked 2026-11-17 |
| Bay of Plenty | NZ$140–200 / m²Includes GST | Tray-profile metal roofContractor-published installed tray profile replacement range. | Bradley Roofing ↗Checked 2026-11-17 |
| Wellington | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Canterbury | NZ$20,000–30,000 / jobGST not confirmed | Corrugated long-run steelTypical 3-bedroom, single-storey Colorsteel reroof in Christchurch. Confirm roof area and GST. | Winter & Son Roofing ↗Checked 2026-11-17 |
| Otago / Southland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Other NZ regions | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

A pitched roof with a compatible metal profile, finish and slope.

A clean-lined roof where a tray profile can be specified for the pitch, exposure and substrate.

A pitched tile roof where the structure and access are suitable for the specified system.

A low-slope area with a designed substrate, drainage route and membrane assembly.

A lightweight cover for a patio or similar roof area that needs daylight.
Use the installed cover after the side lap, not overall sheet width. Use the figure for the exact roof profile.
Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. Enter dimensions including eaves. Roof pitch, minimum slope, fasteners, laps and water management are product and project specific.