TIMBER DEALERS.CO.NZList 0

Roofing & rainwater · New Zealand

Gutter Length Calculator

Estimate gutter stock lengths and nominal support bracket count.

Enter your measurements

Measurements
Product and layout
Ordering allowance
Enter an allowance for your actual cuts, handling or placement.

Stock lengths

9 stock lengths

support brackets: 49 brackets

Required linear metres
25.2 m
Material schedule
ItemQuantity
Stock lengths9 stock lengths
Support brackets49 brackets
Estimate: NZ$588.06 incl. GST (partial)

Enter supplier rates in the units shown. Add labour and delivery only if you want them included.

Marley Classic 3 m spouting
Supports, fittings, downpipes and labour are additional. Counts materials; does not establish hydraulic capacity.

Stock lengths9 stock lengths
NZ$588.06
Price sources for stock lengths
Marley Classic 3 m spouting ↗

NZ$65.34 / each · Includes GST · checked 2026-11-10

3 m spouting length. Gutter section only; brackets, outlets, ends, joints, downpipes extra.

Support brackets49 brackets
Not priced
Add delivery, labour or contingency

Partial estimate

NZ$588.06

Including GST · 1 of 2 material lines priced

Materials (incl. GST)
NZ$588.06
Extras (incl. GST)
NZ$0.00
Contingency (0%)
NZ$0.00
GST included
NZ$76.70

Unpriced materials are excluded from this total.

Worked example

Length along the eave: 24 m

9 stock lengths · support brackets: 49 brackets

How it works and what to check

Gutter run ÷ stock length; supports along the run

  1. Stock length quantity is rounded up after the length allowance. Corners, outlets, stop ends, brackets, lap joints and expansion requirements depend on the exact system.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • Enter dimensions including eaves. Roof pitch, minimum slope, fasteners, laps and water management are product and project specific.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
PVC spoutingstock length / m installedNZ$65.34 / each3 m spouting length. Includes GST.Marley Classic 3 m spouting ↗2026-11-10NZ$90–110 / mAuckland · Includes GST
Metal spoutingm installedAsk for a supplier quoteNZ$110–150 / mAuckland · Includes GST
Downpipes and outletseach run / linear metreAsk for a supplier quoteAsk for a local quote

Prices by NZ region

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
AucklandNZ$90–110 / mIncludes GSTPVC spoutingSupplied and installed PVC replacement guide, Marley Stratus example.Gutter Expert ↗Checked 2026-11-17
AucklandNZ$110–150 / mIncludes GSTMetal spoutingSupplied and installed pre-painted steel replacement guide. Confirm downpipes and access separately.Gutter Expert ↗Checked 2026-11-17
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

PVC spouting example
Illustrative image

PVC spouting

A modular eaves gutter system with matching brackets and moulded accessories.

Metal spouting example
Supplier example ↗

Metal spouting

A metal eaves profile selected to suit the building, finish and exposure.

Downpipes and outlets example
Illustrative image

Downpipes and outlets

Vertical discharge runs measured from the outlet to the approved connection point.

Roofing & rainwater: practical questions

Does this choose the gutter or downpipe size?

No. It counts lengths and nominal supports. Catchment, rainfall intensity, outlets and hydraulic capacity need a drainage-system design.

How do I check the gutter length calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. Enter dimensions including eaves. Roof pitch, minimum slope, fasteners, laps and water management are product and project specific.

Materials for your schedule

Browse gutters →
Product and technical references