
Corrugated long-run steel
A pitched roof with a compatible metal profile, finish and slope.
Roofing & rainwater · New Zealand
Find roof angle, slope length and rise per 12 from two measurements.
Vertical rise: 1.5 m · Horizontal run of one slope: 4 m
20.556°
Pitch = atan(rise ÷ run)
Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.
| Type | Quote unit | Named product price | Regional benchmark |
|---|---|---|---|
| Corrugated long-run steel | linear metre of sheet / m² installed roof | NZ$22.15 / m845 mm nominal width; 0.4 mm steel; special order. Includes GST.Armorsteel 845 × 0.4 mm zinc corrugate roofing steel ↗2026-11-10 | NZ$150–180 / m²Auckland · GST not confirmedNZ$18,000–26,000 / jobWaikato · GST not confirmedNZ$130–175 / m²Bay of Plenty · Includes GSTNZ$20,000–30,000 / jobCanterbury · GST not confirmed |
| Tray-profile metal roof | linear metre of sheet / m² installed roof | Ask for a supplier quote | NZ$140–200 / m²Bay of Plenty · Includes GST |
| Concrete roof tiles | tile / m² installed roof | Ask for a supplier quote | Ask for a local quote |
| Low-slope membrane roof | m² of roof plus perimeter details | Ask for a supplier quote | NZ$200–320 / m²Auckland · GST not confirmed |
| Polycarbonate roofing | sheet / m² of cover | NZ$68.16 / sheet2400 × 860 mm sheet. Includes GST.Tufclad Ultra clear polycarbonate 2400 × 860 mm ↗2026-11-10 | Ask for a local quote |
Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.
| Region | Price in NZD | What the price covers | Source |
|---|---|---|---|
| Northland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Auckland | NZ$150–180 / m²GST not confirmed | Corrugated long-run steelIllustrative simple single-storey gable reroof in Manurewa, 150 m² of roof. | South Auckland Roofing Company ↗Checked 2026-11-17 |
| Auckland | NZ$200–320 / m²GST not confirmed | Low-slope membrane roofPublished 140 m² Māngere Bridge replacement example including substrate and rainwater detail work. | South Auckland Roofing Company ↗Checked 2026-11-17 |
| Waikato | NZ$18,000–26,000 / jobGST not confirmed | Corrugated long-run steelHamilton/Waikato contractor guide for replacing old iron on a single-storey home with 140–170 m² of roof. Spouting is separate. | CTR Roofing ↗Checked 2026-11-17 |
| Bay of Plenty | NZ$130–175 / m²Includes GST | Corrugated long-run steelContractor rate for a long-run metal reroof based on quoted work, with strip-out and roof accessories in scope. | Bradley Roofing ↗Checked 2026-11-17 |
| Bay of Plenty | NZ$140–200 / m²Includes GST | Tray-profile metal roofContractor-published installed tray profile replacement range. | Bradley Roofing ↗Checked 2026-11-17 |
| Wellington | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Canterbury | NZ$20,000–30,000 / jobGST not confirmed | Corrugated long-run steelTypical 3-bedroom, single-storey Colorsteel reroof in Christchurch. Confirm roof area and GST. | Winter & Son Roofing ↗Checked 2026-11-17 |
| Otago / Southland | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
| Other NZ regions | Quote required | Ask for availability and a measured rate delivered to your postcode. | |
For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

A pitched roof with a compatible metal profile, finish and slope.

A clean-lined roof where a tray profile can be specified for the pitch, exposure and substrate.

A pitched tile roof where the structure and access are suitable for the specified system.

A low-slope area with a designed substrate, drainage route and membrane assembly.

A lightweight cover for a patio or similar roof area that needs daylight.
Find roof angle, slope length and rise per 12 from two measurements. The input specification defines the quantity being measured; separate work needs its own schedule.
Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. Enter dimensions including eaves. Roof pitch, minimum slope, fasteners, laps and water management are product and project specific.