TIMBER DEALERS.CO.NZList 0

NEW ZEALAND · PROJECT COST GUIDE

Aggregate and Sand Prices NZ: Bags, Bulk Volume and Tonnes

Confirm grading, use and charging basis before comparing aggregate or sand. Keep loose material, compacted volume, tonnes and delivered loads distinct until the supplier has provided the relevant density and ordering data.

Updated 2026-11-17 · Product, tax and installation scope shown separately

Price your own measurementsPaving Base Course Calculator →

Prices by type and purchase unit

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Graded basecourseloose m³ / tonneNZ$145 / pack0.5 m³ unit; 0–7 mm; special order. Includes GST.Daltons 0–7 mm sub-base metal half cubic metre ↗2026-11-10NZ$49.50 / m³Northland · Includes GSTNZ$39.50 / tonneAuckland · Excludes GSTNZ$43 / 0.5 m³Waikato · GST not confirmed
Bedding sandloose m³ / packNZ$132 / pack0.5 m³ unit; special order. Includes GST.Daltons washed sand half cubic metre ↗2026-11-10NZ$144 / m³Northland · Includes GST
Washed drainage stoneloose m³ / tonneAsk for a supplier quoteAsk for a local quote

Regional NZ price list

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandNZ$49.50 / m³Includes GSTGraded basecourseRussell quarry GAP40 in the one-cubic-metre retail column. Confirm freight and moisture conditions.Russell Quarry ↗Checked 2026-11-17
NorthlandNZ$144 / m³Includes GSTBedding sandRussell quarry sand in the one-cubic-metre retail column. Confirm grading for bedding.Russell Quarry ↗Checked 2026-11-17
AucklandNZ$39.50 / tonneExcludes GSTGraded basecourseSwanson June 2025 DQ40 metal supply price. Request current delivered price for the specified grading.Auckland Landscaping Services ↗Checked 2026-11-17
WaikatoNZ$43 / 0.5 m³GST not confirmedGraded basecourseNgāruawāhia yard GAP40 supply price. Compare on the same loose-volume basis and add freight.ALS Aggregate Landscape Supplies ↗Checked 2026-11-17
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Graded basecourse example
Illustrative image

Graded basecourse

A pavement base built to a compacted depth and a specified grading.

Request material-specific compaction and unit conversion from the supplier. Compare delivered price for the same product rather than volume alone.

Bedding sand example
Illustrative image

Bedding sand

A specified bedding layer for suitable paving or landscaping.

Confirm grading and moisture basis. Estimate using the specified compacted or screeded thickness and allow for handling.

Washed drainage stone example
Illustrative image

Washed drainage stone

Permeable backfill or trench aggregate selected against the drainage design.

Check particle size, fines and the delivery location. Confirm how a part truck and any wait time are charged.

Start with grading and use rather than the cheapest bulk unit

Match grading to the actual use

Base material, clean drainage aggregate, decorative gravel and washed sand are different products. Ask for the specific grading and intended use before comparing the price. The current 0–7 mm sub-base reference should not be relabelled as free-draining gravel or gabion stone just because it is sold by volume.

Loose volume, compacted volume and tonnes

Measure the finished layer, then establish the correct order basis with the supplier. A loose volume, a compacted volume and a tonne order are not interchangeable without suitable material-specific data. Moisture and grading can change bulk density, so a generic density should remain an explicit estimate rather than a hidden price conversion.

Compare packs with delivered truckloads on the same basis

A half-cubic-metre retail unit can be a useful small-order reference while a bulk supplier charges differently for larger loads. Include the material quantity, minimum load, freight and unloading conditions in the comparison. Placement and compaction are additional work unless the supplier or contractor has expressly included them.

Read the bulk price list before comparing with retail bags

Western Aggregates’ price list effective1 April2026 states that aggregate is sold by tonnage, its cubic-metre figures are approximate conversions and prices exclude GST. Compare a selected product on that stated basis, then obtain the delivery price for the actual site. Keep tipping fees separate from supplied aggregate.

Aggregate and Sand Prices — material price checks

Advertised examples checked on 10 November 2026. Each price belongs to the named product and purchase unit. These are source references, not Timber Dealers offers or a completed-job average.

Named materialAdvertised priceTax basisPurchased specification
Daltons washed sand half cubic metreNZ$132 / packIncludes GST0.5 m³ unit; special order
Daltons 0–7 mm sub-base metal half cubic metreNZ$145 / packIncludes GST0.5 m³ unit; 0–7 mm; special order

Loose volume, compacted volume and tonnes differ

  • Density changes with grading, moisture and compaction.
  • The required compacted depth determines finished volume.
  • Minimum delivery, truck access and handling can dominate small orders.

How to build and compare your budget

Compare delivered totals for the same grading and useful volume

Record the required finished depth and area, then agree how the supplier converts order volume into tonnes. Specify grading and whether the quantity is loose or compacted. Keep an alternative budget for small loads where fixed cartage can dominate the unit cost.

Ask each supplier for load limits, tipping position and extra vehicle charges. Include handling from the drop point to the work. If site access rules out the quoted truck size, request the actual number of deliveries before comparing the budget.

Worked orders you can recalculate

Each example changes one measurement. Open it to see the exact starting inputs, adjust the layout and enter your own quote.

Area length: 5 m

2.75 m³
  • Bulk material volume: 2.75 m³
Open this example →

Area length: 10 m

5.5 m³
  • Bulk material volume: 5.5 m³
Open this example →

Area length: 15 m

8.25 m³
  • Bulk material volume: 8.25 m³
Open this example →

Retail packs and truckloads have different charging structures

Ask for an itemised scope that identifies the product or system, quantities, tax basis, delivery and the work included.

  • Transport, placement, compaction, testing and plant
  • Geotextile, excavation and unsuitable material removal
  • Losses beyond the allowance entered in the calculator
  • Get a material-specific density and compaction factor from the supplier.
  • Confirm grading and the intended application.
  • Compare delivered totals using the same volume or mass basis.

Questions about Aggregate and Sand Prices

Can I convert every aggregate price from m³ to tonnes?

Use density for the exact material and its quoted state. A generic tonne-to-volume factor can make different gradings and moisture conditions appear comparable when they are not.

Is sub-base metal the same as drainage aggregate?

No. Compare the grading and specified application. The current 0–7 mm sub-base record is not a generic clean drainage-rock reference.

Why can bulk delivery cost more than the material subtotal suggests?

Minimum loads, travel, truck access and unloading can add charges that do not scale directly with the ordered volume. Obtain a delivered total for the actual site.

Do aggregate supplier rates include GST and delivery?

Check the particular supplier list. Western Aggregates’ sheet effective1 April2026 states all prices are plus GST and asks customers to obtain a delivery quote. That does not establish the charging terms of another merchant.

Build a delivery-and-placement comparison

Sources and technical guidance