TIMBER DEALERS.CO.NZList 0

Paving, landscape & drainage · New Zealand

Gravel & Aggregate Calculator

Convert measured gravel coverage to cubic metres and estimated tonnes.

Enter your measurements

Measurements
Length · 10 mWidth · 5 mDepth · 100 mm
Measure a rectangular section. Diagram not to scale.
Product and layout
Ordering allowance
Enter an allowance for your actual cuts, handling or placement.

Bulk material volume

5.5 m³
Estimated mass
9.35 tonne
Add prices to this calculation

Enter supplier rates in the units shown. Add labour and delivery only if you want them included.

Bulk material volume5.5 m³
Not priced
Price sources for bulk material volume
Daltons 0–7 mm sub-base metal half cubic metre ↗

NZ$145.00 / pack · Includes GST · checked 2026-11-10

0.5 m³ unit; 0–7 mm; special order. Loose advertised volume; excludes compaction loss and delivery.

Reference only. Confirm the same product, pack or scope with the supplier before using a rate.
Add delivery, labour or contingency

Material estimate

Enter a supplier rate to see an estimate. Empty rates stay unpriced.

Worked example

Area length: 10 m · Area width: 5 m · Target layer thickness: 100 mm

5.5 m³

How it works and what to check

Area × depth; volume × supplier bulk density

  1. Volume = area × compacted or finished depth × entered allowance. If ordering loose material, enter the correct compaction allowance and supplier bulk density.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • Bulk density, compaction and delivery load size vary with the material and moisture. Ask the supplier for the ordering basis.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Graded basecourseloose m³ / tonneNZ$145 / pack0.5 m³ unit; 0–7 mm; special order. Includes GST.Daltons 0–7 mm sub-base metal half cubic metre ↗2026-11-10NZ$49.50 / m³Northland · Includes GSTNZ$39.50 / tonneAuckland · Excludes GSTNZ$43 / 0.5 m³Waikato · GST not confirmed
Bedding sandloose m³ / packNZ$132 / pack0.5 m³ unit; special order. Includes GST.Daltons washed sand half cubic metre ↗2026-11-10NZ$144 / m³Northland · Includes GST
Washed drainage stoneloose m³ / tonneAsk for a supplier quoteAsk for a local quote

Prices by NZ region

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandNZ$49.50 / m³Includes GSTGraded basecourseRussell quarry GAP40 in the one-cubic-metre retail column. Confirm freight and moisture conditions.Russell Quarry ↗Checked 2026-11-17
NorthlandNZ$144 / m³Includes GSTBedding sandRussell quarry sand in the one-cubic-metre retail column. Confirm grading for bedding.Russell Quarry ↗Checked 2026-11-17
AucklandNZ$39.50 / tonneExcludes GSTGraded basecourseSwanson June 2025 DQ40 metal supply price. Request current delivered price for the specified grading.Auckland Landscaping Services ↗Checked 2026-11-17
WaikatoNZ$43 / 0.5 m³GST not confirmedGraded basecourseNgāruawāhia yard GAP40 supply price. Compare on the same loose-volume basis and add freight.ALS Aggregate Landscape Supplies ↗Checked 2026-11-17
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Graded basecourse example
Illustrative image

Graded basecourse

A pavement base built to a compacted depth and a specified grading.

Bedding sand example
Illustrative image

Bedding sand

A specified bedding layer for suitable paving or landscaping.

Washed drainage stone example
Illustrative image

Washed drainage stone

Permeable backfill or trench aggregate selected against the drainage design.

Paving, landscape & drainage: practical questions

Are tonnes a fixed conversion from cubic metres?

No. Mass uses the density you enter. Grading, moisture and compaction change it; confirm the supplier charging basis.

How do I check the gravel & aggregate calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. Bulk density, compaction and delivery load size vary with the material and moisture. Ask the supplier for the ordering basis.

Materials for your schedule

Browse landscaping →
Product and technical references