TIMBER DEALERS.CO.NZList 0

Paving, landscape & drainage · New Zealand

Drainage Trench Calculator

Estimate drainage pipe and gravel after subtracting pipe displacement.

Enter your measurements

Measurements
Length · 20 mWidth · 0.3 mDepth · 0.4 m
Measure a rectangular section. Diagram not to scale.
Ordering allowance
Enter an allowance for your actual cuts, handling or placement.

Drainage pipe

21 lineal m

surround gravel: 2.32 m³

Excavated trench volume
2.4 m³
Material schedule
ItemQuantity
Drainage pipe21 lineal m
Surround gravel2.32 m³
Add prices to this calculation

Enter supplier rates in the units shown. Add labour and delivery only if you want them included.

Drainage pipe21 lineal m
Not priced
Price sources for drainage pipe
Marley 110 mm × 30 m Drainflo corrugated punched drainage pipe ↗

NZ$327.00 / pack · Includes GST · checked 2026-11-10

30 m coil, 110 mm punched. Pipe only; no gravel, geotextile, trench, fall design, outlet or fittings.

Surround gravel2.32 m³
Not priced
Add delivery, labour or contingency

Material estimate

Enter a supplier rate to see an estimate. Empty rates stay unpriced.

Worked example

Trench length: 20 m · Trench width: 0.3 m · Total trench depth: 0.4 m · Outside pipe diameter: 110 mm

21 lineal m · surround gravel: 2.32 m³

How it works and what to check

Trench volume − pipe cylinder volume

  1. Gravel volume = trench volume minus pipe cylinder volume, with allowance. Bedding, cover, falls, outlets and filter requirements need a project drainage design.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • This is a material takeoff. Member sizes, spans, reinforcing, foundations, connections and structural suitability must come from the project design.
  • Bulk density, compaction and delivery load size vary with the material and moisture. Ask the supplier for the ordering basis.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Perforated coil draincoil / linear metre installedNZ$327 / pack30 m coil, 110 mm punched. Includes GST.Marley 110 mm × 30 m Drainflo corrugated punched drainage pipe ↗2026-11-10Ask for a local quote
Filter geotextileroll / net m²NZ$114 / pack4 m × 10 m roll/pack. Includes GST.Strol SureTex geotextile 4 m × 10 m ↗2026-11-10Ask for a local quote
Dimpled drainage sheetroll / net m²Ask for a supplier quoteAsk for a local quote

Prices by NZ region

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandNZ$57.20 / m³Includes GSTDrainage aggregateRussell quarry 40/20 or 65/40 drainage stone. Confirm grading and filter system for the actual trench.Russell Quarry ↗Checked 2026-11-17
AucklandQuote requiredAsk for availability and a measured rate delivered to your postcode.
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Perforated coil drain example
Illustrative image

Perforated coil drain

A designed subsurface trench with a specified pipe and outlet.

Filter geotextile example
Supplier example ↗

Filter geotextile

Separation or filtration where the project specifies the required grade and overlap.

Dimpled drainage sheet example
Supplier example ↗

Dimpled drainage sheet

A specified drainage or protection layer within a foundation or retaining assembly.

Paving, landscape & drainage: practical questions

What is included in the drainage trench calculator?

Estimate drainage pipe and gravel after subtracting pipe displacement. The input specification defines the quantity being measured; separate work needs its own schedule.

How do I check the drainage trench calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. Bulk density, compaction and delivery load size vary with the material and moisture. Ask the supplier for the ordering basis.

Materials for your schedule

Browse drainage →
Product and technical references