TIMBER DEALERS.CO.NZList 0

NEW ZEALAND · PROJECT COST GUIDE

Drainage Costs NZ: Trenches, Pipe, Aggregate and Filter Fabric

Price the intended drain route and outlet with trenching, the specified pipe, surround, fabric, connections and reinstatement. A pipe-coil rate is only one component of a complete drainage job.

Updated 2026-11-17 · Product, tax and installation scope shown separately

Price your own measurementsDrainage Trench Calculator →

Prices by type and purchase unit

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Perforated coil draincoil / linear metre installedNZ$327 / pack30 m coil, 110 mm punched. Includes GST.Marley 110 mm × 30 m Drainflo corrugated punched drainage pipe ↗2026-11-10Ask for a local quote
Filter geotextileroll / net m²NZ$114 / pack4 m × 10 m roll/pack. Includes GST.Strol SureTex geotextile 4 m × 10 m ↗2026-11-10Ask for a local quote
Dimpled drainage sheetroll / net m²Ask for a supplier quoteAsk for a local quote

Regional NZ price list

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandNZ$57.20 / m³Includes GSTDrainage aggregateRussell quarry 40/20 or 65/40 drainage stone. Confirm grading and filter system for the actual trench.Russell Quarry ↗Checked 2026-11-17
AucklandQuote requiredAsk for availability and a measured rate delivered to your postcode.
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Perforated coil drain example
Illustrative image

Perforated coil drain

A designed subsurface trench with a specified pipe and outlet.

Check pipe type and diameter, fittings, filter detail and approved connections. Separate trench costs and reinstatement.

Filter geotextile example
Supplier example ↗

Filter geotextile

Separation or filtration where the project specifies the required grade and overlap.

Check roll width against the trench shape and count returns, sides and laps. Compare product performance as well as gross coverage.

Dimpled drainage sheet example
Supplier example ↗

Dimpled drainage sheet

A specified drainage or protection layer within a foundation or retaining assembly.

Ask for details on edges, joints, discharge and protection during backfill. Price the compatible fixing and termination parts.

Define the drain function and outlet before pricing metres

Identify the drain function and the final outlet

A perforated subsoil drain, a surface stormwater line and a repair around existing services do different jobs. Establish the intended system and outlet before using a per-metre figure. The existing punched Drainflo coil is a particular subsoil product, not a substitute for every rigid pipe, downpipe or completed drainage installation.

Trench, pipe surround and filter fabric

Measure the trench width and depth, deduct the pipe displacement when estimating surround material and use the specified aggregate. The fabric schedule needs roll width, side overlaps and any end laps. Fine sub-base should not be used as a price shortcut for clean drainage aggregate simply because both can be entered in cubic metres.

Connections and reinstatement complete the drainage scope

Fittings, pits, connections, approved outlet work, excavated-material disposal and reinstating the finished surface can sit outside a pipe-only rate. Ask the contractor which of these tasks are included and how existing services or restricted access are handled. Keep the measured material schedule beside the installation scope.

Drainage Costs — material price checks

Advertised examples checked on 10 November 2026. Each price belongs to the named product and purchase unit. These are source references, not Timber Dealers offers or a completed-job average.

Named materialAdvertised priceTax basisPurchased specification
Marley 110 mm × 30 m Drainflo corrugated punched drainage pipeNZ$327 / packIncludes GST30 m coil, 110 mm punched
Strol SureTex geotextile 4 m × 10 mNZ$114 / packIncludes GST4 m × 10 m roll/pack

Trench dimensions determine excavation and surround material

  • Punched, unpunched and socked pipe products serve different purposes.
  • Pipe diameter and trench cross section determine displaced aggregate volume.
  • Fabric grade, roll width, overlap and shape change the purchased quantity.

How to build and compare your budget

Compare trench lengths, connection work and reinstatement

Mark where each run begins, turns and connects. Describe trench access, existing services and any surfaces to reinstate. Use the designed grades and dimensions when measuring pipe, trench aggregate and fabric, and allow the specified overlap at its joins.

Ask who supplies the fittings, outlet, clean-out points and connection documentation. Get separate prices for excavation, spoil and reinstatement. Before backfill, agree how levels, connections and concealed details will be recorded.

Worked orders you can recalculate

Each example changes one measurement. Open it to see the exact starting inputs, adjust the layout and enter your own quote.

Trench length: 10 m

10.5 lineal m
  • Drainage pipe: 10.5 lineal m
  • Surround gravel: 1.16 m³
Open this example →

Trench length: 20 m

21 lineal m
  • Drainage pipe: 21 lineal m
  • Surround gravel: 2.32 m³
Open this example →

Trench length: 30 m

31.5 lineal m
  • Drainage pipe: 31.5 lineal m
  • Surround gravel: 3.481 m³
Open this example →

Perforated pipe, rigid stormwater pipe and downpipes differ

Ask for an itemised scope that identifies the product or system, quantities, tax basis, delivery and the work included.

  • Drainage design, trenching, disposal and labour
  • Fittings, pits, outlets and approved connections
  • Testing, consent requirements and delivery
  • Use outside diameter for trench displacement and internal diameter for water storage.
  • Confirm the filter system and final outfall.
  • Price matching pipe diameter, roll length and fabric grade.

Questions about Drainage Costs

Does pipe length determine the complete drainage price?

No. Trench excavation, the pipe type, surround, filter fabric, fittings, outlet work and reinstatement also affect the quotation. Compare the complete written scope.

Can I use the rainwater or pipe-volume calculator to size a drain?

Those tools calculate collection potential or cylindrical storage geometry. Flow sizing, falls, outlet capacity and the drainage arrangement require the relevant project design.

Is 0–7 mm sub-base a suitable reference for drainage gravel?

Do not assume so. Obtain the aggregate grading specified for the drainage system and a matching supplier price rather than borrowing an unrelated fill rate.

Compare complete drainage scopes with reinstatement included

Sources and technical guidance