TIMBER DEALERS.CO.NZList 0

Paving, landscape & drainage · New Zealand

Pipe Water Volume Calculator

Calculate water volume inside a cylindrical pipe using its internal diameter.

Enter your measurements

Measurements
Diameter · 100 mmLength · 20 m
Use the internal pipe diameter. Diagram not to scale.

Internal water capacity

157.08 L
Pipe volume
0.157 m³

Worked example

Internal pipe diameter: 100 mm · Total pipe length: 20 m

157.08 L

How it works and what to check

π × internal diameter² ÷ 4 × pipe length

  1. Use internal pipe diameter, not nominal outside diameter. This is storage geometry, not flow capacity or hydraulic sizing.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • This gives storage volume only. It does not calculate drainage flow or pipe capacity under rainfall.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Perforated coil draincoil / linear metre installedNZ$327 / pack30 m coil, 110 mm punched. Includes GST.Marley 110 mm × 30 m Drainflo corrugated punched drainage pipe ↗2026-11-10Ask for a local quote
Filter geotextileroll / net m²NZ$114 / pack4 m × 10 m roll/pack. Includes GST.Strol SureTex geotextile 4 m × 10 m ↗2026-11-10Ask for a local quote
Dimpled drainage sheetroll / net m²Ask for a supplier quoteAsk for a local quote

Prices by NZ region

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandNZ$57.20 / m³Includes GSTDrainage aggregateRussell quarry 40/20 or 65/40 drainage stone. Confirm grading and filter system for the actual trench.Russell Quarry ↗Checked 2026-11-17
AucklandQuote requiredAsk for availability and a measured rate delivered to your postcode.
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Perforated coil drain example
Illustrative image

Perforated coil drain

A designed subsurface trench with a specified pipe and outlet.

Filter geotextile example
Supplier example ↗

Filter geotextile

Separation or filtration where the project specifies the required grade and overlap.

Dimpled drainage sheet example
Supplier example ↗

Dimpled drainage sheet

A specified drainage or protection layer within a foundation or retaining assembly.

Paving, landscape & drainage: practical questions

What is included in the pipe water volume calculator?

Calculate water volume inside a cylindrical pipe using its internal diameter. The input specification defines the quantity being measured; separate work needs its own schedule.

How do I check the pipe water volume calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. This gives storage volume only. It does not calculate drainage flow or pipe capacity under rainfall.

Materials for your schedule

Browse plumbing →
Product and technical references