TIMBER DEALERS.CO.NZList 0

Concrete & foundations · New Zealand

Concrete Pier Calculator

Estimate the cylindrical concrete quantity for specified piers or piles.

Enter your measurements

Measurements
Diameter · 300 mmDepth · 1 m
Measure the round hole and the filled depth. Diagram not to scale.
Ordering allowance
Enter an allowance for your actual cuts, handling or placement.

Net concrete including allowance

0.594 m³
Gross hole volume
0.565 m³
Add prices to this calculation

Enter supplier rates in the units shown. Add labour and delivery only if you want them included.

Net concrete including allowance0.594 m³
Not priced
Price sources for net concrete including allowance
Firth Certified Ready Mixed Concrete ↗

Quote required · GST not confirmed · checked 2026-11-10

Specify mix strength, slump, site requirements and load size. No ready-mix base price was verified. Obtain a site-specific quote covering delivery, minimum loads, pumping, waiting time and GST. Do not substitute a normalized bagged-concrete price.

Reference only. Confirm the same product, pack or scope with the supplier before using a rate.
Add delivery, labour or contingency

Material estimate

Enter a supplier rate to see an estimate. Empty rates stay unpriced.

Worked example

Hole diameter: 300 mm · Concrete depth: 1 m · Number of holes: 8

0.594 m³

How it works and what to check

π × diameter² ÷ 4 × depth × count

  1. Round hole volume = π × diameter² ÷ 4 × depth × count. Post holes subtract the rectangular post volume.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • This is a material takeoff. Member sizes, spans, reinforcing, foundations, connections and structural suitability must come from the project design.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Slab on groundm³ of concrete / m² of installed slabQuote requiredSpecify mix strength, slump, site requirements and load size. GST not confirmed.Firth Certified Ready Mixed Concrete ↗2026-11-10NZ$110–130 / m²Auckland · Excludes GST
Strip or trench footingm³ of concrete / linear metreAsk for a supplier quoteAsk for a local quote
Pad or pier footingseach / m³ of concreteNZ$11.24 / bag20 kg bag. Includes GST.Cemix Multicrete 20 kg ↗2026-11-10Ask for a local quote
Ribbed or waffle slabm² of slab / designed component scheduleAsk for a supplier quoteAsk for a local quote

Prices by NZ region

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
AucklandNZ$110–130 / m²Excludes GSTSlab on groundPlanning range for a 100–150 mm non-structural floor on a prepared pad. Includes placing, concrete, mesh and polythene. Structural foundation and groundworks are separate scopes.Auckland Concrete Driveways ↗Checked 2026-11-17
AucklandNZ$430 / jobGST not confirmedConcrete pump minimum exampleOn-site flat rate for under 2 hours, under 50 m of hose and under 5 m³ pumped. Concrete supply is separate.MaxPump ↗Checked 2026-11-17
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Slab on ground example
Illustrative image

Slab on ground

A garage, extension or house floor with a defined slab area, edge details and floor level.

Strip or trench footing example
Illustrative image

Strip or trench footing

Continuous support below a wall line where footing dimensions are specified on the drawings.

Pad or pier footings example
Illustrative image

Pad or pier footings

Discrete loads under columns, deck posts or beams where the designed supports fit the site.

Ribbed or waffle slab example
Illustrative image

Ribbed or waffle slab

A specified foundation system with ribs and void formers that support a floor build-up.

Concrete & foundations: practical questions

What is included in the concrete pier calculator?

Estimate the cylindrical concrete quantity for specified piers or piles. The input specification defines the quantity being measured; separate work needs its own schedule.

How do I check the concrete pier calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. This is a material takeoff. Member sizes, spans, reinforcing, foundations, connections and structural suitability must come from the project design.

Materials for your schedule

Browse concrete →
Product and technical references