TIMBER DEALERS.CO.NZList 0

Concrete & foundations · New Zealand

Formwork Quantity Calculator

Estimate slab perimeter boards, contact area and stock lengths.

Enter your measurements

Measurements
Product and layout
Ordering allowance
Enter an allowance for your actual cuts, handling or placement.

Formwork stock lengths

7 boards

4.8 m stock lengths

Perimeter
30 m
Form contact area
4.5 m²
Add prices to this calculation

Enter supplier rates in the units shown. Add labour and delivery only if you want them included.

Formwork stock lengths7 boards · 4.8 m stock lengths
Not priced
Add delivery, labour or contingency

Material estimate

Enter a supplier rate to see an estimate. Empty rates stay unpriced.

Worked example

Length: 10 m · Width: 5 m · Form height: 150 mm

7 boards · 4.8 m stock lengths

How it works and what to check

Perimeter × form height; total length ÷ stock length

  1. Form contact area = perimeter × form height. Stock counts allow for total length, not a detailed corner cut list.
  • Starting dimensions are worked examples. Enter the measured project quantities and the exact product sizes.
  • This is a material takeoff. Member sizes, spans, reinforcing, foundations, connections and structural suitability must come from the project design.

NZ prices by type

Compare the purchase unit and the scope beside each price. Named retail products are supply only. A contractor benchmark applies to the work and location stated.

NZD price references by type
TypeQuote unitNamed product priceRegional benchmark
Slab on groundm³ of concrete / m² of installed slabQuote requiredSpecify mix strength, slump, site requirements and load size. GST not confirmed.Firth Certified Ready Mixed Concrete ↗2026-11-10NZ$110–130 / m²Auckland · Excludes GST
Strip or trench footingm³ of concrete / linear metreAsk for a supplier quoteAsk for a local quote
Pad or pier footingseach / m³ of concreteNZ$11.24 / bag20 kg bag. Includes GST.Cemix Multicrete 20 kg ↗2026-11-10Ask for a local quote
Ribbed or waffle slabm² of slab / designed component scheduleAsk for a supplier quoteAsk for a local quote

Prices by NZ region

Published rates cover named jobs or products in the areas shown. Match the scope before using a local figure.

Price references and quote coverage by NZ region
RegionPrice in NZDWhat the price coversSource
NorthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
AucklandNZ$110–130 / m²Excludes GSTSlab on groundPlanning range for a 100–150 mm non-structural floor on a prepared pad. Includes placing, concrete, mesh and polythene. Structural foundation and groundworks are separate scopes.Auckland Concrete Driveways ↗Checked 2026-11-17
AucklandNZ$430 / jobGST not confirmedConcrete pump minimum exampleOn-site flat rate for under 2 hours, under 50 m of hose and under 5 m³ pumped. Concrete supply is separate.MaxPump ↗Checked 2026-11-17
WaikatoQuote requiredAsk for availability and a measured rate delivered to your postcode.
Bay of PlentyQuote requiredAsk for availability and a measured rate delivered to your postcode.
WellingtonQuote requiredAsk for availability and a measured rate delivered to your postcode.
CanterburyQuote requiredAsk for availability and a measured rate delivered to your postcode.
Otago / SouthlandQuote requiredAsk for availability and a measured rate delivered to your postcode.
Other NZ regionsQuote requiredAsk for availability and a measured rate delivered to your postcode.

For any option absent in a region, ask for an itemised local quote. Supply, labour, access and GST can be quoted on different bases.

Types and photo examples

Slab on ground example
Illustrative image

Slab on ground

A garage, extension or house floor with a defined slab area, edge details and floor level.

Strip or trench footing example
Illustrative image

Strip or trench footing

Continuous support below a wall line where footing dimensions are specified on the drawings.

Pad or pier footings example
Illustrative image

Pad or pier footings

Discrete loads under columns, deck posts or beams where the designed supports fit the site.

Ribbed or waffle slab example
Illustrative image

Ribbed or waffle slab

A specified foundation system with ribs and void formers that support a floor build-up.

Concrete & foundations: practical questions

What is included in the formwork quantity calculator?

Estimate slab perimeter boards, contact area and stock lengths. The input specification defines the quantity being measured; separate work needs its own schedule.

How do I check the formwork quantity calculator result?

Review the displayed formula and match the inputs to the product or drawing. Check whole-unit rounding and the actual cut layout before ordering. This is a material takeoff. Member sizes, spans, reinforcing, foundations, connections and structural suitability must come from the project design.

Materials for your schedule

Browse structural timber →
Product and technical references